New Page 1

TOLL FREE 888-869-2424

BRUCKNER MECHNICAL FACE DRIVER - SMK TYPE

Type SMK Mechanical Face Driver

Common Technical Features:

The Design - BRUCKNER aimed for minimum overhang and constrictions in the working area. Available with Morse taper or for flange-mounting for flanges to DIN.
VDS (Vibration Damping System) - The Vibration-damping element reduces vibrations occurring during operation resulting in: Longer life of driving pins and turning tools, and Improved workpiece surfaces due to smooth running
Constant Point of Reference - The high-speed steel driving pins are supported by a hardened sphere segment within the basic body: Advantages - Exact lengthwise turning, Out-of-square workpiece faces are compensated for, High operating safety
Easy Pin Change - The driving pins and the centerpoint can be taken out from the front. The flats on the sides of the pins enable the user to easily extract them with a screwdriver
Sping-loaded Centerpoint - Compensates for varying depth of centerbores
Concentricity Runout - Max. 0.02 mm

Type SMK Mechanical Face Driver

Technical Data (mm):

^{Basic Body Incl. Draw-off Nut, Without Driving Pins}										Driving Pins
^Type	^{ID No}	^{Morse Taper}	^d1	^d2	^d3	^d4	^l1	^l2	^l3	ID No.	Turning Range	Clamping Ø
SMK	6712	2	3	6	29	52	66	8	34	671AS	6-10	5.8
	6713	3	3	6	29	52	66	8	34	671BS1	9-13	8
	6714	4	3	6	29	52	66	8	34	671BS2	12-16	11
	6715	5	3	6	29	52	66	8	34	671CS	-	*

* to be ground to suit specific diameters

Driving Pins for Type SMK:

Symmetrical Form: Forms AS, BS 1, BS 2, and CS for right and left hand rotation during the same turning operation.
Call our Sales Team for additional Information 800-349-1044